Gaskets
With time, the gaskets in the door will wear, and, in order to avoid wild combustion, they must
be replaced as required. Use an original Morsø gasket kit that is supplied with precise instruc-
tions for use.
note: normal wearing parts are not covered by Morsø’s extended warranty.
A selection of maintenance products (spare parts, glass cleaner, paint, gasket kit, etc.) is avail-
able from your Morsø dealer.
3.3 Cleaning the stove
Ashes and soot will settle, especially over the baffle plates, because of the draft in the chim-
ney and after a sweeping. The ashes have an insulating effect that may accelerate the burning
through of the baffle plates because it cannot give off the heat. The baffle plates may be taken
out of the stove during normal cleaning. Today, the chimney sweep, in addition to sweeping the
chimney and cleaning the flue pipes, must take care of removing soot from the stove.
The chimney sweep will establish the annual number of sweeps and cleanings after having
consulted you.
Ash
As noted above, there should be a layer of approximately 1 cm insulating ash in the bottom of
the combustion chamber in order to achieve a high combustion temperature. If the layer of ash
is too thick, it can be brushed down with an ash shovel, dustpan or similar tool.
In most cases, the ash will need to be taken away by the waste disposal company. Because em-
bers may be concealed in the ash pan for several days, it may be necessary to store the ash in a
container made of non-flammable material before pouring it into a rubbish bag.
Ash from a wood-burning stove will not be of any benefit to your garden as fertiliser. If you have
burned colour brochures, or painted or treated wood, etc., in the stove, the resulting ash must
not be poured onto soil as it may contain heavy metals.
Spare parts for the S80-90
Description
Product no.
Stone, rear
57800300
Stone, side
57800200
Stone, bottom front
57800400
Stone, bottom back
57800600
Baffle plate, top
57800000
Baffle plate, bottom
57800100
Door packing cord
57100700
Glass window
57800500
Reasons for overly rapid wear of internal parts
- Stove fired too vigorously
- Use of very dry wood (wood from old furniture).
- Too much soot on top of the baffles (please see the section on Cleaning).
- Too much ash in the ash pan (please see the section on Ash).
Morsø Jernstøberi A/S - 2011.02.24 - 72800000
www.morsoe.com
Summary of Contents for S80-90
Page 19: ...19 DK ...
Page 20: ...20 NG ...