23
DK ENG
1.6 Connecting the flue pipe
The flue collar can be rotated and be used for ø150 (inside and outside the flue collar) and ø120
connections.
Mounting the flue collar pointing upwards
From the factory, the stove is prepared for installation with a top exit flue collar (1). Take the
baffle plates out of the stove to facilitate the installation. The enclosed cast-iron flue collar is
fastened to the top of the stove with the included screws. The ball stop, which prevents the
chimney sweep from damaging the stove’s baffle plates while sweeping, is the 160 mm long rod
that is provided in the stove. The flue collar stop bar is fitted when installing the chimney.
Mounting the flue collar to the rear
Take the baffle plates out of the stove to facilitate the installation.
Remove the knock out cover from the rear heat shield with easy firm taps of a hammer next to
the small conneting “bridges”. Now remove the cover from the rear convector plate using the
same method. Next, the round cover is unscrewed from the back panel of the stove and rein-
stalled in the hole in the top panel. The enclosed cast-iron flue collar is fastened to the back of
the stove with the included screws.
The ball stop is not used when installing with the flue collar to the rear.
Finally, the enclosed cover plate is put in place in the top panel to cover the flue exit hole.
The location of the baffles
The baffles (2) and (3), which are made from
vermiculite, are mounted on delivery.
Make sure that the baffles are correctly as-
sembled before lighting the stove (please
see the sketch).
Fresh air connection, if required
The stove is factory prepared for installation
of an optional extra adaptor (4) for a fresh air
connection underneath the stove. However,
this does not apply to the wall-hung S11-70.
A
A
A-A
1
2
3
4
Revisions
Rev.
Sign.:
Title:
Drawing no.:
1:5
Snit til vejledning
Morsø S11
RSV
2011.08.11
A4
Date of print: 11-09-2012
U:\udv\Tegninger\S11\S11 Fireplace Assembly.SLDASM
S-11-006 a
-
Itemno.:
This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.
Material:
Weight kg.:
Model no.
Drawingtype:
Location of file:
Scale:
Format:
Released:
Construction:
Date:
Stove shown with
optional adaptor fitted
Summary of Contents for S11-40
Page 18: ...18 NG...
Page 35: ...35 DK...
Page 36: ...36 NG Mors Jernst beri A S 12 09 2012 72114200 www morsoe com...
