The Specialist In Drum Handling Equipment
operator’s Manual for Morse < PILot > Power-Propelled Drum Racker Model 910
serial number 267142 to 294520
morsedrum.com
Copyright 2018 - Morse Mfg. Co., Inc.
Form OM910 (267142-294520) (Updated August 17, 2018 8:55 AM)
2
Model 910
Power-Propelled Drum Racker
safety Information
(continued)
DAnGeR
- Indicates a situation which, if not avoided,
will
result in serious injury or death.
This signal word is limited to the most extreme situations.
WARnInG
- Indicates a situation which, if not avoided,
could
result in serious injury or death.
CAUtIon
- Indicates a situation which, if not avoided, can result in damage to the machine.
CAUtIon
-
Do not transport with drum raised.
Always lower the drum holder to lowest position before transporting.
DAnGeR
- stay well clear of power lines.
Never approach a power line. Current in a high voltage line may arc some distance from the wire to the steel
framed, grounded machine.
WARnInG
- The < PILOT > Power-Propelled Drum Racker is designed to handle one drum of the types listed at
the top of page 3 - Machine Description. DO NOT attempt to handle any other type of drum or object. DO NOT
exceed the weight capacity.
WARnInG
- Level floors only.
For operation only on clean, level floors of suitable bearing capacity. Do not use on sloped surfaces, ramps,
irregular or debris strewn floors.
WARnInG
- Do not modify the unit.
Under no circumstances should any modifications be made to the Morse machinery without factory authorization.
Any modifications may void the warranty. This machine was designed to perform a specific job and alterations may
result in injury to operator or machine.
WARnInG
- No loose fitting clothing.
Wear close-fitting clothing and safety equipment appropriate to the job. Loose fitting clothing may become caught
on the machinery and cause severe personal injury.
WARnInG
- Hydraulic fluid under pressure can be hazardous.
Escaping hydraulic fluid under pressure can penetrate the skin, causing serious injury. Avoid the hazard by
relieving pressure before disconnecting hydraulic lines. Keep hands and body away from pinholes and nozzles,
which eject fluid under high pressure. Use a piece of cardboard to search for leaks. If an accident occurs, see a
doctor immediately and inform them of the nature of the accident.
CAUtIon
- Wear safety shoes.
Wear safety shoes with non-slip soles and hard toe protection.
WARnInG:
This product can expose you to chemicals including cobalt, titanium dioxide, and 2-methylimidazole,
which are known to the State of California to cause cancer, and bisphenol-A, which is known to the State of
California to cause birth defects or other reproductive harm. For more information go to
WARnInG:
This product can expose you to chemicals including lead and arsenic, which are known to the State
