morsedrum.com
Copyright 2019 - Morse Mfg. Co., Inc.
Form PL286-1 (1114-____)
(Updated 20 Jun, 2019)
3
The Specialist In Drum Handling Equipment
Model 286-1
Fork Mount Drum Handler
operator’s Manual for Morse
MOR
SPEED
1000
TM
Fork Mount Drum Handler Model 286-1
serial number 1114 to ____ (MMYY)
Machine Description
The
model 286-1
MOR
SPEED
1000
TM
Fork Mount Drum Handler is designed to lift and
transport:
Rimmed steel, fiber or plastic drum.
•
Maximum capacity is 1000 Lb. (454 kg) per drum.
•
Requires a minimum of 50 Lb. (23 kg) per drum to begin the gripping action.
•
Drum height must be 20” (51 cm) or taller.
•
Works with any diameter drum.
•
Can be used with a straight walled or damaged drum.
•
Important
Review the Material Safety Data Sheet(s) for the material(s) in the drum(s) and take all necessary precautions. Safety shoes, work
1.
gloves, hard hat and other personal protective devices are recommended.
Please read all instructions thoroughly before attempting to operate your new Morse
2.
drum handler.
The model 286-1 has a maximum capacity rating of 1000 Lb. (454 kg) per drum.
3.
Exceeding this rating or handling drums other than those mentioned above is unsafe
and could result in equipment damage, excessive wear or awkward handling.
When loading, unloading, operating, or maintaining your MORSE drum handler,
4.
always use care and good judgment. Maintain secure footing and a firm hold. Keep
hands and loose clothing away from all moving parts. Never allow anyone to be
below any part of a raised drum handler or drum. Read operating instructions and review the pictures in the sales brochure before
operation.
Because the Morse model 286-1 is a front-end attachment for a forklift, OSHA recommends that “… the truck (forklift) be marked to
5.
identify the attachment(s) and show the approximate weight of the truck and attachment combination at maximum elevation with load
laterally centered.” See center of gravity dimensions of model 286-1 on page 8 for calculating lost load on your equipment.
Prior to initial use, inspect all moving parts. Inspect for proper operation. Perform necessary load test, inspections, operator training,
6.
etc.