Copyright 2009 - Morse Mfg. Co., Inc.
Form PL400M-72 (0804-0309) (Updated 12/2009)
Page 4
WARNING
- Watch Out for Pinch Points
Stay clear of moving parts. Operator should remain behind the push handle during the lift operation.
Floor Lock
The screw-down floor lock is located on the base of the tower
(figure 3.1). Turning the floor lock clockwise until it locks in the
down position activates the floor lock. When the floor lock is
activated it prevents unwanted free wheeling of the unit. Floor
conditions determine the effectiveness of the floor lock. The
operator should verify its holding action before depending on
it to hold.
Drum Holder Assembly
The drum holder assembly (or “saddle assembly”) is the compo-
nent on the Hydra-Lift Karrier that is intended to hold the drum.
The drum holder assembly is designed to secure a standard
ribbed 55-gallon steel drum around it’s middle using a cinch
chain and ratchet tightening system. The drum holder accepts
accessories for handling smaller diameter drums.
Operator’s Manual for Morse Hydra-Lift Drum Karrier with Spark Resistant Parts
Model 400AM-72
Serial Number 0804 to 0309 (MMYY)
Figure 3.1
The Specialist In Drum Handling Equipment
Model 400AM-72
Hydra-Lift, 72”, Manual Lift, Manual Tilt
with Spark Resistant Parts
