The Specialist In Drum Handling Equipment
MODEL 400A-72SS-125
Stainless Steel Hydra-Lift Karrier, 72”,
DC Power Lift, Manual Tilt
Operator’s Manual for Morse Model 400A-72SS-125
Serial number 0512 to ____ (MMYY)
morsedrum.com
Copyright 2019 - Morse Mfg. Co., Inc.
Form OM400A-72SS-125 (0512-____)
(Updated 12 Jun, 2019 11:55 AM)
2
WARNING:
This product can expose you to chemicals including lead and arsenic, which are known to the
State of California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov
Safety Information (continued)
DANGER
- Indicates a situation which, if not avoided,
will
result
in serious injury or death. This signal word is limited to the most
extreme situations.
WARNING
- Indicates a situation which, if not avoided,
could
result
in serious injury or death.
CAUTION
- Indicates a situation which, if not avoided, can result in
damage to the machine.
CAUTION
– Do not Transport with Drum Raised -
ALWAYS LOWER THE DRUM HOLDER TO
LOWEST POSITION BEFORE TRANSPORTING.
The unit can become unstable when transporting
with a raised load.
DANGER
- Stay Clear of Power Lines -
KEEP WELL CLEAR OF POWER LINES.
Never approach
a power line. Current in a high voltage line may arc some distance from the wire to the steel framed,
grounded machine.
WARNING
-
The Hydra-Lift Karrier is designed to handle one drum of the types listed at the top of page
3, under
2. Machine Description
.
DO NOT
attempt to handle any other type of drum or object.
DO
NOT
exceed the weight capacity of 800 Lb.
WARNING
- Level Floors Only -
For operation only on clean, level floors of suitable bearing capacity.
Do not use on sloped surfaces, ramps, irregular or debris strewn floors.
WARNING
- Do not Modify the Unit -
Under no circumstances should any modifications be made
to the Morse machinery without factory authorization. Any modifications may void the warranty. This
machine was designed to perform a specific job and alterations may result in injury to operator or ma
-
chine.
WARNING
- no Loose Fitting Clothing -
Wear close-fitting clothing and safety equipment appropri
-
ate to the job. Loose fitting clothing may become caught on the machinery and cause severe personal
injury.
WARNING
- Hydraulic Fluid Under Pressure Can Be Hazardous -
Escaping hydraulic fluid under
pressure can penetrate the skin, causing serious injury. Avoid the hazard by relieving pressure before
disconnecting hydraulic lines. Keep hands and body away from pinholes and nozzles, which eject fluid
under high pressure. Use a piece of cardboard to search for leaks. If an accident occurs, see a doctor
immediately and inform them of the nature of the accident.
CAUTION
- Wear Safety Shoes -
Wear safety shoes with non-slip soles and hard toe protection.
WARNING:
This product can expose you to chemicals including barium sulfate, cobalt, titanium
dioxide, and 2-methylimidazole, which are known to the State of California to cause cancer, and
bisphenol-A, which is known to the State of California to cause birth defects or other reproductive harm.
For more information go to
www.P65Warnings.ca.gov
