The Specialist In Drum Handling Equipment
Model 400A-60-120
Hydra-Lift, 60”, AC Power Lift, Manual Tilt
Operator’s Manual for Morse Hydra-Lift Karrier Model 400A-60-120
Serial Number 1210 to ____ (MMYY)
morsedrum.com
Copyright 2019 - Morse Mfg. Co., Inc.
Form PL400A-60-120 (1210-____)
(Updated 18 Jun, 2021)
3
Hand Wheel
Kit # 2690-P
16” (40.6 cm) diameter
Hand Wheel
with speed knob.
Replaces standard
Hand Crank to turn
drum.
Kit for customer to install
on EXISTING manual tilt
drum handler.
MORStop
TM
Tilt-Brake
Kit # 3900-P
Automatically holds
drum tilt angle until you
move it.
Kit for customer to install
on EXISTING manual tilt
drum handler.
Machine Description
The Model 400A-60-120 Hydra-Lift Karrier will pour a drum up to 72” (183
cm) high, measured from the floor to the lowest point of a horizontal drum. It
is designed to lift, transport, and dispense a 55-gallon (210 liter) steel drum
22” to 23.5” (56 to 59.7 cm) in diameter.
The maximum full-drum capacity is 800 Lb. (363 kg). The capacity is derated
to 500 Lb. (227 kg) for a half-full drum. The half-full rating is based on the tilt
mechanism’s capacity for handling an unbalanced bottom-heavy drum.
Options
55/30 Series Diameter Adapters
•
for smaller drum. To handle a smaller
drum, insert the correct size Diameter Adapter into the standard drum
holder. See Diameter Adapter info at:
https://morsedrum.com/products/
Bracket Assembly Kit # 4556-P
•
is
required
to handle a RIMLESS
plastic drum (see figure 2.1). The Bracket Assembly is also
recommended when handling a fiber drum. The Bracket adjusts for a
drum 31” to 39” (79 to 99 cm) tall. You can also handle a rimmed drum
with the Bracket installed.
Top Rim Clamp Kit # 4560-P
•
to handle a RIMMED 55-gallon plastic
drum (see figure 2.2). Use the Top Rim Clamp to handle a 55-gallon (210
liter) plastic, steel or fiber drum with suitable top rim. You
must
install
either the Top Rim Clamp or the Bracket Assembly to handle a plastic
drum.
Figure 2.2
Plastic drum being lifted
with Kit # 4560-P
Top Rim Clamp
Assembly installed.
Figure 2.1
Plastic drum being lifted
with Kit # 4556-P
Bracket Assembly installed.