morse 26 Operator'S Manual Download Page 2

The Specialist In Drum Handling Equipment

Drum Pumps

morsedrum.com

Copyright 2019  -  Morse Mfg. Co., Inc. 

 

 

Form PL26 

 

(Updated 11 Jun, 2019)

               

2

safety Information

 (continued)

DAnGeR 

- Indicates a situation which, if not avoided, will result in serious injury or death.  

This signal word is limited to the most extreme situations.

WARnInG 

- Indicates a situation which, if not avoided, could result in serious injury or 

death.

CAUtIon 

- Indicates a situation which, if not avoided, can result in damage to the machine.

WARnInG 

- Do Not Modify the Unit. Under no circumstances should any modifications be made to the Morse 

machinery without factory authorization.  Any modifications may void the warranty.  This machine was designed to 

perform a specific job and alterations may result in injury to operator or machine.

WARnInG 

- No Loose Fitting Clothing. Wear close-fitting clothing and safety equipment appropriate to the job.  

Loose fitting clothing may become caught on the machinery and cause severe personal injury.

CAUtIon 

- Wear safety shoes with non-slip soles and hard toe protection.

CAUtIon 

-  DO NOT allow drum to impact on floor, ground, or dumping station, etc.

WARnInG 

- Verify the chemical compatibility of the materials of your pump with the liquid you want to pump. If 

you are uncertain regarding chemical compatibility, contact your dealer for applications assistance and request a 

copy of our Corrosion Resistance Charts. Do not use a pump that is not chemically compatible with the liquid you 

intend to pump or serious bodily injury, death, fire, explosion or environmental damage could result. See 

Chemical 

Compatibility Chart

 online.

IMPoRtAnt 

- Refer to Chemical Resistance Data Chart for compatibility of materials. Always wear protective 

safety clothing such as gloves, apron, goggles. 

DAnGeR 

- When pumping flammable or combustible liquids from one container to another, both containers must 

be effectively bonded and grounded to prevent discharge of sparks or static electricity which could cause explosion 

and bodily harm.

WARnInG: 

This product can expose you to chemicals including cobalt, titanium dioxide, and 2-methylimidazole, 

which are known to the State of California to cause cancer, and bisphenol-A, which is known to the State of 

California to cause birth defects or other reproductive harm. For more information go to 

www.P65Warnings.ca.gov

Summary of Contents for 26









Reviews: