11
STEP 10:
A: Fix 2 screws (B) on front control panel of side burner and leave 5mm space for hanging control knob plate (9) ((B)
Screw 2Pcs).
B: Hang the control knob plate (9) onto 2 screw heads. There have 2 pairs of hanging holes included, please use the
shortest hole distance pairs for hanging.
C: Turn the control knob plate (9) clockwise to secure it on the control panel.
D: Tighten 2 bolts (C) securely on the control panel.
Note: Do not fully tighten the bolts until all 2 screws (B) and control knob plate (9) are in place.
.
STEP 11:
A: Insert the end tube of side burner (8) into the slot of side burner pan (See diagram a & b).
B: The end tube of the side burner should be positioned so that the side burner valve stem protrudes into it for
approximately the length 15mm of the metal grill section (it need not be pushed fully cover the valve stem) (See
diagram c).
C: When in the correct position, the screw holes in the underside of the side burner should align with those in the base
of the side burner pan - secure it by using screw B ((B) Screw 2Pcs) (See diagram d & e).
D: Connect igniter wire to igniter electrode (See diagram e).
E: Place side burner grid (7) onto side burner pan.
5m
m
(B)
(B)
(9)
a
(7)
(8)
b
c
(B)
(B)
d
e
15mm