Power Button
Press the power button to turn the dehumidifier on and off.
Swing control Button
Press once to make the louvres swing and press again
to lock at 45 degrees, press again to lock at 90 degrees. Do not operate the unit if the self-
opening louvers do not open when the unit is powered on.
Timer Button: Press the timer button
then use
buttons
to adjust the timer (1-24 hrs, start/ stopping timer). In power on mode the set number
will represent the number of hours the unit will run for before turning off. This will remain
unaffected if unit goes in to defrost mode or the tank is emptied than reinserted. In standby
mode the set number represents the period in hours after which the unit will start. To
cancel the timer press the timer button again.
Smart mode: smart set the target humidity 50% and smart
determine the wind speed and dehumidification capacity
according to the current humidity of the room; the wind speed
cannot be adjusted manually.
a: When the ambient humidity is >65%, the fan runs at high speed and the powerful
dehumidification operation;
b: When the ambient humidity is between 55% and 65%, the fan normal runs the standard
dehumidification capacity output;
c: When the ambient humidity is between 50% and 55%, the fan runs at a low speed (sleep)
and outputs a lower dehumidification capacity;
d: When the ambient humidity is <50%, the fan runs at a low speed, without
dehumidification output, and only circulates indoor air.
Heater mode : The unit will work as per temperature control,the fan speed will work
same as last setting.The control panel will display room temperature,front panel
display room humidity.The target temperature can be adjusted by the up & down button
(16-30C,each step 1C).When adjusting the temperature,the data on control panel and
front panel will flash together and display the settings.After it is set,the control panel will
continue to display the temperature,and front panel humidity. Use the fan speed button
to adjus the fan speed and output of heating capacity.
Dehumidifier mode : The unit will work as per humidity control, the fan speed will work
same as last setting,the control panel will display the room humidity,the front panel
displays room temperature,the target humidity can be adjusted by the up & down button
(35-80%,each step 5%), when adjusting the humidity,the data on control panel and front
panel will flash together and display the settings. After it is set,the control panel will
continue to display the humidity,and front panel temperature. Use the fan speed button
to adjus the fan speed and output of heating capacity.
QUICK REFERENCE GUIDE
Air purifier Mode – No moisture will be extracted in this mode, which when used with filters
will purify the air. The U
V and ionizer c
an also be used in this mode to further improve
the quality of air processed.
Please note :
1,when heater / dehumidifier / smart mode is on,due to the large room space or
some other reasons,the target setting can not be reached even if the unit keeps on
working for a long time.If the unit works continuously more than 8 hours,the unit will
be shut off automatically
2,when heater / dehumidifier / auto mode is on,when the room temperature or humidity
reaches the target,the heating element will be closed,and fan keeps on working for 5
minutes,fan motor,fan louver will all closed,display is still on,and then,after 30 minutes,fan
motor and fan louver start to work again to detect the room temperature and humidity
(a),if it is necessary to turn on (room temperature is less then 1C or room temperature is 2%
above the settings),the heating element will be turned on to start the heating or dehumidify
(b),if it is not necessary to turn on,the fan will continue to work 5 miniutes and then closed,fan
louver is closed as well,display is still on.
And then repeated as per the above logic
3) when heating / dehumidifier / smart mode is on,when the heating element is on,if power
off manually,the heating element will be shut off immediately,the fan motor will keep
on working for 5 minutes ,in order to radiate the inner heat,please do not remove the plug
within 5 miniutes,in order to avoid destroying the unit.Fan motor and fan louver will stop
after 5 minutes
10
11
