57
4.9.1.5 User config
In the navigation bar to select ”
Snmp>Snmp Config>User Config
”, setting Snmp user.
The following picture:
【
Parameter Description
】
Parameter
Description
User name
User name,range 1-16
Security level
Attestation not only encryption: this group of users
transmission of the message need to verify the data don't need
to confidential
No authentication encryption: this group of users' messages
don't need to verify data transmission also does not need to be
kept secret
Both authentication and encryption: this group of users need to
verify the news of transmission and transmission of data need
to be kept secret
Authentication mode
Specified use MD5 authentication protocol or SHA
authentication protocol
Authentication
password
Range 8-10
encrypt mode
Specified using AES encryption protocol or DES encryption
protocol
Group name
A user group name
encrypt password
Range 8-60
【
Instruction
】
The upper limit of the number of users is 8, the need to build a new view and the group
can be used, the user's security level needs to be consistent with the group's security level.
Add a user to use the authentication and encryption methods, and configure the user
group, the user will be used for Snmpv3 connection.
【
Configuration example
】
Such as: new view 123, the newly built group group1, new users user1.
