9
Figure 5 - Rack Installation
2.1.3 Power on the Switch
The Switch is powered on by connecting it to an outlet using the AC 100-240V 50/60Hz
internal high-performance power supply. Please follow the next tips to connect:
AC Electrical Outlet:
It is recommended to use single-phase three-wire receptacle with neutral outlet or
multifunctional computer professional receptacle. Please make sure to connect the metal
ground connector to the grounding source on the outlet.
AC Power Cord Connection:
Connect the AC power connector on the back panel of the Switch to an external
receptacle with the included power cord, and check the power indicator is ON or not.
When it is ON, the corresponding LED is illuminated.
2.2 Connect Computer (NIC) to the Switch
Please insert the NIC into the computer, after installing network card driver, please
connect one end of the twisted pair to RJ-45 jack of your computer, the other end will be
connected to any RJ-45 port of the Switch, the distance between Switch and computer is
around 100 meters. Once the connection is, succeed and the devices are power on
normally, the LINK/ACT/Speed LEDs for each port will be illuminated.
2.3 Switch connection to the PD
The 1-8 ports of the Switch have PoE power supply function, the maximum output power
of each port is 30W. The switch can supply power to the PD devices, such as internet
phone, network camera, wireless access point work, by linking the device with the Switch
using network cable.
