background image

Owners Manual 

Power Washer 

Horizontal Series 

 
 

 

 

Important: 

 

Make certain that everyone who uses the Morpower pressure 

washer reads and understands these instructions prior to operation 

 
 

 

Safety precautions are essential when any mechanical equipment is involved.  These precautions 
are necessary when using, storing, and servicing mechanical equipment. Using this equipment  
with the respect and caution demanded will considerably reduce the possibility of personal injury.  
This unit was designed for a specific application.  It should not be modified and or used for any 
application other than what it is designed.  If there are any questions regarding its application 
write or call.    
 

Summary of Contents for Horizontal Series

Page 1: ... equipment is involved These precautions are necessary when using storing and servicing mechanical equipment Using this equipment with the respect and caution demanded will considerably reduce the possibility of personal injury This unit was designed for a specific application It should not be modified and or used for any application other than what it is designed If there are any questions regard...

Page 2: ...ggles while operating 12 The pressure washer should not be used in areas where gas vapors may be present An electric spark could cause and explosion or fire 13 Do not run the pressure washer for more than 5 minutes without depressing the trigger or damage to the pump may result 14 The pressure washer should only be operated in areas with good ventilation 15 Do not refuel in areas with poor ventila...

Page 3: ...re If you have interchangeable tips you will need to put in the one with a large opening for low pressure Maintenance and Storage To extend the life of your pressure washer change the pump oil after 5 hours of use and every 50 hours thereafter Drain the oil and refill with SAE 15 W 40 non detergent oil SAE 30W oil may be used if the pump is completely drained and filled with fresh oil Your pump is...

Page 4: ...quite as effective method 1 Stop the pressure washer and detach supply hose and high pressure hose Squeeze the trigger of the discharge gun to drain all water from the wand and hose 2 Restart the pressure washer and let it run briefly about 5 seconds until water no longer discharges from the high pressure outlet When not using any engine drive product for extended periods of time it is always advi...

Reviews: