6
Follow the two maintenance steps below after
every use.
1.
Switch the cleaner off and unplug from the
socket. Place immediately on a suitable surface
(eg. tiled floor) where the residual heat/moisture in
the floor nozzle/cloth will not affect the surface.
Wait until the cleaner has cooled down
completely.
2.
Remove the cloths to either air dry or wash.
3.
Empty the water tank
(11)
by removing the filler
cap
(9)
and pouring out the water. To facilitate
this, we recommend removing the handle and
tubes by pressing the handle release button
(8)
(see point 2 of ‘Assembling the handle’, page 4).
Allow the inside of the water tank to dry out
before replacing the filler cap.
We recommend storing the steam cleaner with
the carpet glider
(21)
attached, but the cloths
removed.
Lower the handle by lifting the tube extension clip
(5)
. Push down on the handle
(1)
to push the
upper handle tube
(4)
down into the lower handle
tube
(6)
. Push the tube clip back down to lock.
Fold out the lower cord storage hook
(14)
. Wrap
the cord around the two cord storage hooks
(2/14)
, rotating the upper cord storage hook
(2)
upwards to secure the power cord
(15)
in place.
WARNING: Always unplug the steam cleaner
from the mains supply before undertaking any
maintenance procedures.
Overall maintenance
Your cleaner is manufactured to withstand normal
day-to-day use, but an occasional wipe over with
a damp cloth will help maintain it. Abrasive
cleaners should not be used.
Cleaning the cloths
The micro-fibre hard-floor and carpet floor cloths
(18/20)
can be machine washed (30ºC max). For
heavy soiling, soak the cloths in warm water and
detergent or a mild stain remover.
IMPORTANT: Do not use bleach or fabric
softener.
Allow to completely dry before storing.
Contact our helpline to purchase replacement
cloths.
Helpline
If you are having a problem with your appliance,
please call our Helpline, as we are more likely to
be able to help than the store you purchased the
item from.
Please have the product name, model number
and serial number to hand when you call to help
us deal with your enquiry quicker.
UK Helpline:
0844 871 0960
IRE Helpline:
1800 409 119
Spares:
0844 873 0726
Talk To Us
If you have any questions or comments, or want
some great tips to help you get the most out of
your products, join us online:
Blog:
www.morphyrichards.co.uk/blog
Facebook:
www.facebook.com/morphyrichardsuk
Twitter:
www.twitter.com/loveyourmorphy
Website:
www.morphyrichards.com
Maintenance
Contact us
Storage
After use
VC70465MUK Rev2_Instruction Book 25/09/2012 15:00 Page 6
