Assembly
B
WARNING: Do not plug in the cleaner
until it is assembled.
1
Carefully unpack all components.
2
Lift cleaner body to upright position.
3
Remove the two screws that are already
attached to the body.
4
From the rear of the cleaner, align the
handle with groove and slide into the
body. If necessary, use thumb and finger
pressure to slide handle into position.
5
Fasten the handle with the two screws.
Floor nozzle height
adjustment
C
Before using the cleaner the floor nozzle
height must be set to the correct height.
Choose the setting which most closely
matches your floor surface, ie. deep carpet
pile, medium carpet pile, short carpet pile or
hard floor.
• When using the attachments the cleaner
must only be used in an upright position
with the carpet height adjustment knob
set to DEEP CARPET.
Note: The height adjustment only comes
into effect when the handle is released by
the handle release pedal
Â
.
Using on carpets
1
Place cleaner in its upright position.
2
Set the carpet height adjustment knob to
the desired position.
3
Release the mains cable by revolving the
quick release cleat
1/
2
a turn and extend
the cable fully.
4
Plug the cable into the mains socket.
5
Step on the handle release pedal to
release the handle to the desired
position.
6
Press the on/off button to the ‘on’
position.
IMPORTANT: To prevent damage to
carpets, never leave the cleaner switched on
in one place for an extended period.
•
Never have the brushes set too low such
that the cleaner is hard to push.
Using attachments
Follow steps 1-4 above but set the carpet
height adjustment knob to the deep carpet
setting.
5
Remove the hose connector
›
from the
rear of the cleaner. Lift the hose
¤
from
the top handle hook and push the
required attachment onto the end of the
hose.
•
Push the required attachment firmly onto
the end of the hose.
•
If additional length is required, attach one
or both extension tubes between the
hose and tool.
6
Switch on/off.
• IMPORTANT: Always fix the hose clip
È
to the main body slot
Ë
when using the
hose and tools.
• Never over extend the hose such that the
cleaner is pulled over.
• Turning the cleaner sideways helps
prevent the cleaner being pulled along by
the stretch hose.
4
B
D
EEP CARPET
HARD FLOOR
MEDIUM CARPET
TOOLS
C
73340 Rev 1 4/3/05 10:29 AM Page 4
