Assembly
1
Screw one of the tubes into the handle
connection on the floor nozzle. Tighten
by hand.
Do not over tighten
2
Put the first handle tube into the upright
position
3
Screw the next tube into the first.
4
Repeat for the third tube.
5
Finally screw the loop handle onto the
last tube.
Note: The loop handle is free to rotate.
For use on stairs
1
The loop handle may be screwed directly
to the floor head for stair cleaning
.
4
Charging the sweeper
1
Plug the charger into the wall socket.
2
Connect the charger to the sweeper.
3
Switch the wall socket on.
4
The charging indicator illuminates green
to indicate charging is in progress.
• If the charging indicator does not
illuminate press the on/off pedal. The
product will only charge if the pedal is in
the off position.
• Keep your floor sweeper connected to
the charger when not in use, in order to
ensure full cleaning capacity.
70475 rev4 3/3/06 11:49 AM Page 4
