Using preground coffee
1 Remove the glass jug
‡
from the hot
plate.
2 Fill the glass jug with the required amount
of cold water, (10 cups maximum) and
close the jug lid. Both the jug and water
level indicators are marked in cups. Do
not exceed the maximum level.
3 Lift up the reservoir lid
⁄
by pressing the
release button and pour the contents of
the glass jug into the water reservoir
È
.
The water gauge window
¤
indicates the
amount of water needed.
4 Replace the glass jug on the warming
plate
fi
.
5 Place the permanent filter
Ê
in the
grinder/filter basket
Á
a paper filter could
be used instead.
When making coffee using pre-ground
coffee, 10 cups of coffee can be made.
Note: One measuring scoop is
approximately equal to one tablespoon.
IMPORTANT: Do not fill above the max.
line of the grinder/filter basket.
6 Spoon the required amount of pre-ground
coffee into the filter we suggest 1
measuring scoop per cup although a
maximum of 12 scoops can be used
depending upon personal taste.
7 Replace the filter basket cover/bean
hopper
‰
and the grinder lid
„
.Close the
reservoir lid
⁄
and press to lock.
Note:Ensure the lid is locked otherwise
the non drip valve will not open, causing
the filter to flood. The grind and brew will
not operate if the cover of the unit is open
more than 1cm or filter basket cover/bean
hopper are left out.
8 Ensure the glass jug is positioned on the
warming plate and that a filter has been
placed in the filter basket. Plug into the
electrical socket. The clock display will
flash ‘0:00’ until the clock has been set.
This will not interfere with the operation of
the coffee maker.
9 Once the water and coffee are in place,
press the on/off button twice.
Note: If you are brewing fewer than 5 cups
we recommend that you use the f
programme to ensure full coffee flavour.
To use the f programme set up
the coffee machine as outlined in steps
1-9. Press the flavour button coffee will
brew into the machine, serve as required.
10 The brew light will show to indicate the
machine is brewing.
11 When the coffee has been made, serve as
required. The anti-drip valve will prevent
any remaining coffee dripping onto the
hotplate. Ensure that the jug is replaced
on the hotplate after serving. While the
coffee machine is switched on the
hotplate will keep the coffee warm.
12 Switch off the coffee maker when the jug
is empty or the coffee is no longer
required. WARNING THE COFFEE MAKER
AND HOT PLATE ARE HOT AND REMAIN
HOT FOR SOME TIME AFTER
SWITCHING OFF.
13 Remove the grinder lid, filter basket
cover/bean hopper, permanent filter and
grinder filter/basket. Empty used coffee
grounds, wash immediately and dry
thoroughly.
Refilling
Switch off the coffee maker and allow 3
minutes to cool before refilling with cold
water for another brew.
6
