44
U
UK
K H
He
ellp
plliin
ne
e 00887700 006600 22661144
R
Re
ep
plla
ac
ce
em
me
en
ntt P
Pa
arrttss 00887700 115577 66664455
IIrre
ella
an
nd
d H
He
ellp
plliin
ne
e 11880000 440099111199
O
OP
PE
ER
RA
AT
TIIN
NG
G T
TH
HE
E
A
AP
PP
PL
LIIA
AN
NC
CE
E
B
Be
effo
orre
e u
us
se
e
Take your coffee maker out of the
box and remove the packaging.
Before using the appliance for the
first time, clean thoroughly by
operating two or three times with the
maximum volume of fresh water (6
cups) but without using coffee.
Wash the detachable parts of the
machine in warm soapy water.
M
Ma
ak
kiin
ng
g e
es
sp
prre
es
ss
so
o
c
co
offffe
ee
e
1
Unscrew the pressure cap by turning
it anti-clockwise.
2
To fill the water tank use your glass
jug to measure the volume of water
required. The jug is marked with the
water levels for 2 cups (minimum), 4
cups and 6 cups (maximum).
Always switch the machine off and
remove the plug from the socket
before filling the water tank. Care
should be taken to ensure that the
correct quantity of water is placed in
the tank, as the machine always
uses all the water.
3
Close the pressure cap tightly by
turning it clockwise.
4
Place the washable metal filter into
the filter holder and add the desired
quantity of coffee to the filter using
the measuring spoon provided.
Special marks on the inside of the
filter show the correct levels for 2, 4
and 6 cups of coffee lightly
compress the coffee down. Remove
excess coffee from the edge of the
filter.
5
Position the filter holder underneath
the water outlet
,,
push it upwards
and turn it to the right into the locked
position to fix it onto your coffee
machine.
A
A
Note: Push firmly to the right to lock
into position.
6
Your machine is fitted with a strength
selector which allows you to make
LIGHT to STRONG coffee. Set the
strength selector mid way between
LIGHT and STRONG for MEDIUM
strength coffee.
7
Place your glass jug with the lid on
the drip tray and directly under the
spout of the filter holder, ensuring
that the jug handle is pointing
outwards from the unit.
8
Plug the espresso coffee maker in at
hte wall socket and push the coffee
on/off switch to ‘ON’ position. The
orange light will glow to show th
ecoffee maker is working.
9
The coffee will start to flow from the
filter holder spout after about 2 or 3
minutes. Wait until all the water from
the water tank has flowed into your
glass jug and the green light glows.
10
When the filtering process is
complete switched off the coffee
maker, remove the glass jug from
your coffee maker and pour the
coffee into your cups.
WARNING: The coffee maker and
hot plates are hot and remain hot
for some time after switching off.
11
Unplug machine and allow to cool.
Slowly remove the pressure cap
.
12
To remove the used coffee grounds,
remove the filter holder by turning
the handle to the left until you find
that the filter holder drops down. Flip
the filter retaining clip so that it
retains the filter. Turn the filter upside
down and knock out the grounds.
Flip the retaining clip back along the
handle before the next use.
Note: Due to the amount of steam
lost through the process, the coffee
produced will be less than the water
put in. This is accounted for in the
amount to put in.
A
A
47009 rev2 24/4/06 15:12 Page 4
