44
U
UK
K H
He
ellp
plliin
ne
e 00887700 006600 22661100
R
Re
ep
plla
ac
ce
em
me
en
ntt P
Pa
arrttss 00887700 115577 66664411
IIrre
ella
an
nd
d H
He
ellp
plliin
ne
e 11880000 440099111199
44
O
OP
PE
ER
RA
AT
TIIN
NG
G T
TH
HE
E
A
AP
PP
PL
LIIA
AN
NC
CE
E
B
Be
effo
orre
e u
us
se
e
Take your coffee maker out of the
box and remove the packaging.
Before using the appliance for the
first time, clean thoroughly by
operating two or three times with the
maximum volume of fresh water (10
cups) but without using coffee.
Wash the detachable parts of the
machine in warm soapy water.
L
Lo
oc
ca
attiin
ng
g tth
he
e ffiilltte
err
1
To remove the filter, slide the locking
tab on the removable filter holder to
the unlock position and lift both the
holder and mesh filter out to clean.
(see cleaning)
A
2
To refit, place the removable filter
holder into the top of your coffee
maker, making sure the tab lines up
with the rib then slide the locking tab
to the lock position. Place the
permanent mesh filter inside the filter
holder by lining up the locating tab
with the groove in the filter holder as
shown
M
Ma
ak
kiin
ng
g c
co
offffe
ee
e
1
Lift up the hinged reservoir lid.
2
Fill the water reservoir with the
required amount of water using the
water level indicator as a guide. Both
the jug and water level indicator are
marked in cups. Do not exceed the
maximum level on the water
gauge.
B
3
Spoon the required amount of
ground filter coffee into the mesh
filter spreading it evenly. We suggest
one level measuring spoon for every
cup. Ensure the filter is sitting
properly in the filter holder.
4
Close the reservoir lid.
5
Select the strength of coffee required
using the strength selector on the
reservoir lid.
6
Slide the jug into the coffee maker
ensuring it sits correctly on the hot
plate. The jug lid must be in place
during the brewing process,
otherwise the non-drip valve will not
open, causing the filter to flood.
7
Plug the filter coffee maker in at the
wall socket and push the coffee
on/off switch to ‘ON’ position. The
orange light will glow to show coffee
maker is working.
8
Hot water will start to flow through
the coffee grounds and into the glass
jug as coffee.
9
When the filtering process is
complete remove the glass jug from
your coffee maker and pour the
coffee into your cups.
10
The anti-drip valve will prevent any
remaining coffee dripping onto the
hot plate. Ensure that the jug is
replaced on the hot plate after
serving. While the coffee maker is
switched ON the hot plate will keep
the coffee warm.
11
Switch off the coffee maker when the
jug is empty or the coffee is no
longer required.
WARNING: The coffee maker and
hot plates are hot and remain hot
for some time after switching off.
12
Allow unit to cool.
13
Remove the permanent mesh filter
and empty the used coffee grounds.
Wash the filter immediately and dry
thoroughly. NOTE: THE MESH WILL
BECOME DISCOLOURED AFTER A
WHILE DUE TO THE STAINING
EFFECT OF COFFEE.
NOTE: It is normal for the green
ready light to go out and come back
on intermittently due to thermostatic
cycling.
B
Rib
Locking tab
A
47008 rev2 24/4/06 14:42 Page 4
