Using your beauty mirror
Place the mirror on a hard, level
surface.
Plug in the power source.
Loosen the angle locking device
slightly and swivel mirror to either
standard reflection or triple
magnification.
Angle the mirror to suit and
tighten the angle locking device to fix
into place.
Plug the mirror into the electrical
socket and switch on at the on/off
switch on the power cord to produce
the light halo effect.
3
Replacing the light bulb
Ensure the appliance is switched
off and the plug has been removed
from the electrical socket.
Use a small screwdriver to remove
the two screws at the rim of the
mirror. Carefully remove the rim
section and replace the bulb inside
with a bulb of the same specification.
Replace the mirror rim section
aligning the screw holes exactly and
carefully replacing the screws.
Bulb specification - 240 volts 25 watt
Eddison small screw fitting
clear candle bulb
