background image

5

Replacing electronic cartridge
reminder

When the cartridge reminder is due for

renewal it can easily be removed.

1

Pull both tabs upwards and lift out the
cartridge reminder. 

H

2

To refit your new cartridge reminder, slot
tabs into the lugs provided and click into
place.

Telephone our replacement parts

helpline for your new cartridge reminder.

Switching on

You do not need to wait until the

water has filtered through before
boiling.

Your Morphy Richards filter kettle,

will boil and filter at the same time giving
you boiled, filtered water quickly.
• Boil only as much water as you need as

this saves electricity.

1

Place the filter kettle on the base unit,
ensuring the kettle locates on to the 360˚
connector.

• The 360˚ connector allows the kettle to

be located at any position, - ideal for left
and right handed users and convenient
positioning on worktop.

2

Plug in and switch on at the wall socket.

3

Switch the filter kettle on. The ‘power on’
neon, will light up.

4

When the water boils the filter kettle will
switch off automatically.

• If you are using the kettle for the first

time, discard the water and repeat once
more.

• To re-boil, switch to ON again. If the

kettle has just switched off wait a minute
or so before switching it back on again.

• If you do not put in enough water, or

switch on the filter kettle when it is
empty, the safety cut-out will switch off
the power automatically. If this happens,
refill and wait a few minutes for the
element to cool, then use as normal.

5

Lift the filter kettle from the base unit by
the handle ensuring you hold the kettle
level. 

WARNING: Unless the cartridge

holder is fitted correctly, the filter
kettle may not operate correctly and
the lid may not close and lock
securely.

When to change your cartridge

This depends on water quality and the

improvement required. We recommend that
you change your cartridge after 1 month.

The electronic reminder on your Morphy

Richards water filter system will remind you
when to change your cartridge.

H

43550 Filter kettle Rev 5  21/3/05  3:03 PM  Page 5

Summary of Contents for Filter rapide kettle









Reviews: