5
For details of other Morphy Richards products, please see our website:
CLEANING AND
MAINTENANCE
Unplug from the mains before cleaning. The
vacuum cleaner, especially the dust
compartment and all accessories, can be
cleaned using a damp cloth or a
non-abrasive domestic cleaner and wiped
dry.
To keep the underside of the combination
floor nozzle clean, vacuum it at regular
intervals using the crevice tool.
FILTERS
Changing and cleaning the
motor protection filter
This cleaner is fitted with a motor protection
filter. NEVER USE THE VACUUM CLEANER
WITHOUT THIS IN PLACE.
We recommend this filter is replaced every
12 months or sooner if required.
The filter may also be rinsed in lukewarm
water but must be allowed to dry completely:
1
Remove the filter from the filter grille
H
.
2
Rinse the filter in lukewarm water and dry the
filter completely.
3
Put the filter back into the filter grille and
reassemble.
Changing and cleaning the
exhaust filter
This cleaner is fitted with an exhaust filter.
NEVER USE THE VACUUM CLEANER
WITHOUT THIS IN PLACE.
We recommend this filter is replaced every
12 months or sooner if required.
The filter may also be rinsed in lukewarm
water but must be allowed to dry completely.
Remove the exhaust filter cover
‰
by pulling
the locking tabs towards you
I
.
Remove the used filter. Insert the clean micro
exhaust filter and replace the filter cover.
IMPORTANT:
•
All filters should be checked regularly for
signs of damage, preferably after each
cleaning task. The filters must be replaced
immediately if they become damaged.
•
Always disconnect the cleaner from the
mains when checking filters.
•
Always make sure all filters are fitted before
use. Failure to do so may result in damage to
your product.
•
If the sound of the cleaner changes slightly,
clean the filters and check for blockages.
H
I
VC73192MUK Rev3_Instruction Booklet 11/03/2011 14:33 Page 5
