7
7
This function is ideal for cleaning vertical
surfaces and hard to reach places.
Separate the hand-held steamer
(8)
from the
main body
(7)
by sliding the hand-held release
button
(6)
upwards on the front of the main body.
Pull the hand-held steamer up and out of the
main body.
In order to use all of the accessories, the
accessory adaptor
(22)
must firstly be attached
onto the hand-held steamer
(8)
. This can be
done by completing the following:
1.
Slide the adaptor over the nozzle of the steam
cleaner with the release catch on the adaptor
facing the base of the hand-held steam cleaner.
2.
Align the keyway on the hand-held steamer with
the release catch on the adaptor. Push together
and fix into place.
3.
Attach the desired accessory to the end of the
adaptor by aligning the arrow on the accessory
with the right-hand arrow on the adaptor and
twist the accessory until the arrow aligns with
the left arrow of the two on the adaptor.
WARNING: Switch OFF and unplug before
changing nozzles. After use, nozzles will be
very hot, allow to cool before handling.
Using in upright steamer mode (continued)
5
Place the floorhead
(18)
on the floor. Hold the
floorhead to the floor with your foot and tilt the
main body
(7)
back.
To emit steam continually, press and hold the
steam trigger
(2)
whilst slowly pushing the
cleaner back and forth along the floor.
But to
prevent over-wetting of the floor, operate the
steam trigger intermittently (especially on hard
floors).
6
If cleaning carpet, rest the floorhead
(18)
with
floor cloth
(20)
attached into the carpet glider
(19)
to make it easier to move the floorhead
across the carpet.
NOTE: The carpet glider is intentionally a loose
fit on the floorhead.
Using the hand-held steam cleaner
VC70495MUK Rev1_Instruction Book 18/07/2012 14:56 Page 7
