5
Dual functionality
Upright steaming
Hand-held steaming
Your steam cleaner can easily be configured into
two different cleaning modes:
•
Upright steam cleaner for floors and carpets.
•
Hand-held steam cleaner
(8)
for cleaning vertical
or hard to reach surfaces.
Attachments
(22-31)
can be used on the
handheld steamer.
Upright steaming: assembly
A
C
E
D
B
A
Insert the handle
(1)
onto the main body
(7)
.
B
Insert one of the screws (supplied) into the
hole in the lower cord storage hook
(5)
and
rotate until tight.
Insert the other screw (supplied) into the side
of the handle (on the opposite side to the
lower cord storage hook) and rotate until tight.
NOTE: Attaching the handle is necessary for
first time assembly only.
C
Lower the main body onto the floorhead
(18)
,
with the floorhead release button
(17)
on the
neck of the floorhead to the back of the
assembly, until it clicks into place.
D
Insert the steam outlet nozzle at the bottom
end of the hand-held steamer
(8)
into the
adaptor at the bottom of the space in the front
of the main body.
Push the steam cleaner firmly into the space in
the main body until it clicks into place.
E
Attach the floor cloth
(20)
to the floorhead and
tighten the toggle at the rear.
IMPORTANT: Please remember that the steam cleaner operates by emitting steam at an increased
temperature of 115
o
C. Always test on an inconspicuous area first. Never use it on objects or surfaces
which cannot resist this temperature, or on delicate materials such as dralon, plastic, natural fur etc.
If in doubt, check carefully on a part of the material where minor marks will not matter.
Operating the appliance
VC70495MUK Rev1_Instruction Book 18/07/2012 14:56 Page 5
