6
6
UK Helpline 0844 871 0960
Replacement Parts 0844 873 0726
Ireland Helpline 1800 409 119
•
Glass Carafe Variant
When the brewing process is
complete, the product will
automatically switch to keep
warm; the auto keep warm
indicator
will light up.
The automatic keep warm
function will keep the coffee
warm
in the carafe until
the product is switched off.
The anti-drip valve
È
will
prevent any remaining coffee
dripping onto the hot plate
during serving. Ensure that
the jug is replaced on the hot
plate after serving.
We suggest consuming your
coffee within two hours, after
this time we suggest brewing
another jug of fresh coffee.
WARNING: The coffee
maker and hot plates are
hot and remain hot for
some time after switching
off.
NOTE:
•
Remember to turn off the
machine when you have
finished.
•
Allow the unit to cool.
•
Remove the permanent filter
and empty the used coffee
grounds. Wash the filter
immediately and dry
thoroughly.
Thermal Carafe Variants
•
When the brewing process is
complete, the product
remains on, we recommend
you switch off your coffee
maker as soon as brewing is
complete.
•
The thermal carafe
·
will
keep the coffee warm in the
jug for up to four hours.
•
The anti drip valve
È
will
prevent any remaining coffee
dripping onto the base
recess during serving.
•
We suggest consuming your
coffee within two hours, after
this time we suggest brewing
another jug of fresh coffee.
•
WARNING: The coffee
maker and hot plates are
hot and remain hot for
some time after switching
off.
NOTE:
•
Remember to turn off the
machine when you have
finished.
•
Allow the unit to cool.
•
Remove the permanent filter
and empty the used coffee
grounds. Wash the filter
immediately and dry
thoroughly.
DIGITAL
INTERFACE
VERSIONS
„
Set the clock
•
When the machine is plugged
in, the display will flash 12:00
dimly.
•
To set the time, press the
hour button
ˆ
and minute
buttons
˜
to reach the
desired time.
NOTE: The clock is a 24 hour
clock.
The clock will be reset each
time the product is
unplugged at the wall.
Making coffee
1
Press the push button
fi
to
open the hinged lid. The lid
will automatically rise
G
.
2
Using the jug, fill the water
reservoir
¤
with the required
amount of water using the
level indicator
Ê
as a guide.
Both the jug and water level
indicator are marked in cups
H
.
3
Spoon
‹
the required
amount of ground filter coffee
into the mesh filter
›
,
spreading evenly. We suggest
one level measuring spoon
for every cup. Ensure the
filter is sitting properly in the
filter holder
I
.
4
Close the lid. Ensure the lid is
closed and latched properly
J
, otherwise the machine will
not function correctly.
5
Slide the jug
‡/·
into the
coffee maker, ensuring it sits
correctly on the hot plate
K
.
The jug lid must be in place
during the brewing process;
otherwise the non drip valve
will not open, causing the
filter to flood.
Thermal Carafe Variant
Note: Thermal carafe versions
have no hot plate. Please
ensure the jug sits correctly
on the base recess.
I
J
H
K
G
47060 rev5_47060 Rev 1 20/09/2011 12:24 Page 6
