For details of other Morphy Richards products, please see our website:
5
5
OPERATING THE
APPLIANCE
BEFORE USE
Before using your coffee
maker for the first time or if
you have not used it for some
time, rinse the machine by
running water through. Follow
the procedure for making
coffee, without coffee in the
filter holder.
The product that you have
purchased is available in four
different versions:
•
Manual version - Glass carafe
•
Manual version - Thermal
carafe
•
24 hour automatic timer
version - Glass carafe
•
24 hour automatic timer
version - Thermal carafe
For the complete
understanding of how to use
your machine, please refer to
the specific section related to
your version.
Please note not all variants
are available in all countries,
please contact your retailer
for more information.
MANUAL
INTERFACE
VERSIONS
‚
Making coffee
1
Press the push button
fi
to
open the hinged lid. The lid
will automatically rise.
2
Using a jug, fill the water
reservoir
¤
with the required
amount of water using the
level indicator
Ê
as a guide.
Both the jug and water level
indicator are marked in cups
A
.
3
Spoon
‹
the required
amount of ground filter coffee
into the mesh filter
›
,
spreading evenly. We suggest
one level measuring spoon
for every cup. Ensure the filter
is sitting properly in the filter
holder
B
.
4
Close the lid. Ensure the lid is
closed and latched properly
C
, otherwise the machine
will not function correctly.
5
Slide the jug
‡/·
into the
coffee maker, ensuring it sits
correctly on the hot plate
D
.
The jug lid must be in place
during the brewing process;
otherwise the non drip valve
will not open, causing the
filter to flood.
Thermal Carafe Variant
Note: Thermal carafe versions
have no hot plate. Please
ensure the jug sits correctly
on the base recess.
•
Ensure the jug
·
lid is fully
closed by turning the lid
clockwise, this ensures the
maximum temperature is
maintained in the jug. To
ensure the coffee is kept as
warm as possible, we advise
you rinse your thermal carafe
in hot water before use.
•
Please note the jug lid must
be in place during the
brewing process; otherwise
the non-drip valve will not
open, causing the filter to
flood.
6
Select the required strength
of coffee using the strength
selector on the lid
E
.
7
Plug the filter coffee maker in
at the wall socket and switch
on, the water gauge
Ê
will
illuminate. Rotate the dial
Ï
to select one of the two on
positions available:
1/2
carafe
or a full carafe
F
, depending
on the number of cups
required. Refer to ‘Cup
selection function’ on page 11
for further information.
8
The cup selection indicator
Ì/Ó
and the brewing on
indicator
Ô
will light up. The
hot water will start to flow
through the coffee grounds
and into the jug as coffee for
you to enjoy.
A
B
C
D
E
F
47060 rev5_47060 Rev 1 20/09/2011 12:24 Page 5
