10
UK Helpline 0844 871 0960
Replacement Parts 0844 873 0726
Ireland Helpline 1800 409 119
1. WATER MANAGEMENT
Filling
1
Place the steam generator on a stable ironing
board or table, with the iron resting on its
stand.
2
Open the filler cap at the front of the water
tank and fill to the FILL TO HERE line using
the filler cup
Á
provided or a suitable jug.
WE RECOMMEND YOU USE DISTILLED OR
DEMINERALISED WATER IN THIS UNIT.
Never use battery topping up fluid or water
containing any substances like starch or
sugar, or defrosted water from a refrigerator.
3
Always drain out any remaining water after
use (see instructions below).
Re-filling ‘in use’
1
Refilling can be done whilst the appliance is
in operation. It is not necessary to wait for
the appliance to cool down.
2
Open the filler cap at the front of the water
tank and fill as necessary.
Low water cutout
E
The unit has an electronic system to monitor the
water level. When the level is low, the LOW
WATER ICONS
6
/
11
will flash and a beep will
be heard for 10 seconds to warn the user to refill
the tank. Once the unit has been filled, the LOW
WATER ICONS will disappear.
NOTE: When the LOW WATER WARNING
ICONS activate, the boiler will still deliver steam
for a short period then the unit will switch off,
this action saves the unit from damage.
Draining the water tank
F
When ironing is complete, we advise you to
empty any water left in the tank.
This model is fitted with a drain system situated
at the front of the unit.
1
Disconnect the unit from the mains supply.
2
Place the unit on the sink drainer so water can
run away safely.
3
Push back the drain release catch
Í
and rotate
the tube
Ë
outwards using the tab
È
.
4
Water will now drain automatically.
5
Once the tank is empty, replace the tube making
sure it clips in place.
E
Water tank drain
Ë
Drain tube
È
Drain tube tab
Í
Drain tube
release catch
Í
È
Ë
È
Ë
Í
Slide in this
direction
Rotate tube
outwards
F
6 11
RN42236MUK Rev2_Instruction Book 25/10/2010 11:38 Page 10
