Turning on the radio
Press
STANDBY
.
1 The radio switches on when the power is connected.
2 Switch on/off by pressing
STANDBY
.
In stanby, the display shows the date and time.
Easy push-and-turn operation
This radio uses a special push and turn control (the rotary
SELECT
control) which provides easy navigation of the menus on the large
LCD screen.
Press to enter a menu and turn clockwise or anti-clockwise to scroll
through the options.
Press
BACK UP
to return to the previous menu. (Alternatively, at the
end of the main menu is exit, press
SELECT
to return to the previous
menu.)
Items with ‘...’ will take you to a further submenu, items without will
perform an immediate operation.
Here are four typical screens, although they vary by subject:
Usual radio screen
Main menu screen with scroll
bar
Menu screen with check boxes
Menu screen with choosable
preset options
Automatic tuning
When the radio is switched on for the first time it will select DAB
mode and
scanning
will start. The radio will scan DAB first and then
FM. The screen shows the number of stations found, a bar graph of
progress and the current frequency.
All stations that are found are stored alphanumerically. When
scanning
has finished, the first station in the list will play. <
Tuning
>
will appear briefly.
If no stations are found, then try the following:
1
Ensure the aerial is fully extended.
2
Move the radio to a new location.
Selecting stations
1 To select another station, turn the rotary control anti-clockwise or
clockwise.
•
The list of stations will appear in the LCD screen. Turn the rotary
control anti-clockwise or clockwise to choose a station. FM
stations are listed first by frequency, then DAB stations
alphabetically.
6
Simple user guide
Signal Srength
Mute indicator
DAB/FM indicator
9241 EPG DAB radio MUK 2.qx4 12/5/05 10:09 AM Page 6
