mori seiki ZL-153, Operation Manual

Page: 214 / 561

A-126 OPERATION PANELS
7-7-1 Operation Panel Screen
Function selection key (SETTING) [OPE. PANEL]
This screen is used to set the following NC functions. For the details of the NC functions, refer to
the reference sections indicated in the table.
The screen consists of two pages. The desired page can be called by pressing the page selection
keys.
No. Menu Soft-Keys Refer to
1 OPERATION PANEL [OPE. PANEL] 7-7-1
2 ROTARY TOOL [ROTARY TOOL] 7-7-2
3 PC WORK COUNTER [WORK COUNTER] 7-7-3
4 TOOL LIFE MANAGEMENT [TOOL LIFE] 7-7-4
5 LOAD MONITOR [LOAD MONIT] 7-7-5
50
SETTING [SETTING] 7-7-6
51 TIMER [TIMER] 7-7-7
52 WEEKLY TIMER [WEEKLY TIMER] 7-7-8
53 IN/OUT PARAMETER [IN/OUT] 7-7-9
NC Function Refer to
CHUCK DIRECTION 5-6-7 Chuck Clamp Direction (page A-34)
TAILSTOCK ILK.
5-6-8 Tailstock Spindle Interlock (Tailstock Specification)
(page A-35)
WORK COUNTER 5-6-9 Work Counter (Option) (page A-36)
MACHINE LOCK 5-6-5 Machine Lock (page A-32)
AUX. F. LOCK 5-6-10 Auxiliary Function Lock (page A-37)
CHUCK FOOT SWITCH 5-6-11 Chuck Footswitch (page A-38)
CHUCK STROKE END
5-6-12 Chuck Jaw Stroke End Detection Switch
(page A-39)
ZERO POINT SET 5-6-13 Zero Point Adjustment (page A-41)
TLSTCK POS. ADJ. 5-6-14 Tailstock Position Adjustment (ZL-253) (page A-42)
SPINDLE OFF MODE 5-6-15 Spindle OFF Mode Function (page A-43)
SETTING