Page 36
CREASING / BOOKLET MAKING
Setting the Machine up as a Booklet Maker
Back
Capture Image Now
Recognition
Leading Edge
Crease
90mm
+70 mm No Hinge
IMAGE TEMPLATE
90
100
120
110
130 140 150 160 170 180 190 200 210 220 230 240 250 260 270 280 290
Camera Recognition Assistant
Paper
Gate
Fixed Rear Lay Edge
Image Area
Part No. 70-113
90 mm
102.5
mm
7m
m
3 mm
Viewed From Underneath
Image Can Only Be
Within This Band
Of Sheet
+60 mm 10 mm Hinge
FIXED DATA
If there is no image on the sheet, at 90mm from the leading edge of the sheet,
then another position greater than 90mm must be set.
Limitations to the positions of the captured image are pre set in the software
and cannot be exceeded. See Below.
An Image template is provided with the camera recognition system kit to assist
in showing the possible area of the image that can be captured. The Template is
shown below.
(viii) Move the selection switch down.
(ix) Place the sheet, that has the required image, onto the feed bed with the
image face down.
(x) Press the Compressor Switch down.
(xi) Press the System Switch down.
