Morgan PLUS FOUR, Owner'S Handbook Manual

Page: 36 / 74

33
Locate the front rail lock/release clamps and squeeze
the clamp and outer lever together. Make sure both sprung catches are properly aligned
with their holes at the rear of the vehicle. Push down
vigorously over each spring catch to lock in place.
HOOD DOWN PROCEDURE (CONT.)
The press studs are behind the trailing edge of the
doors. Lift the outer ring and pull to release the side
of the hood from the vehicle.
FOLD 1
FOLD 2
WARNING
Failure to release the press studs
before lowering the hood can damage
the vehicle body work.
Lay the clamps flat.
Begin lifting the hood from the front rail. Carefully
make a neat fold through the rear window panel. Continue to tilt the hood backwards while making a
second fold between the window and roof section.
Lower the roof fully onto itself, making a third fold.
The main roof fabric should be pulled backwards over
the tail as the roof frame folds down to avoid the
scissor action of the mechanism.
WARNING Ensure the high level brake light is
not covered by the fabric from the hood.