8
9
INSTALLATION INSTRUCTIONS
CONTROL PANEL: fUNCTIONS & PROCESSES
CHANGING THE DRAINAGE HOSE DIRECTION
You can change the direction from right side to left side.
NOTE:
Put gloves on to prevent injury of your hands when changing the Drainage Hose direction.
1. Unplug the Power Cord of the washer.
2. Detach the Back Cover by loosening screws at the back side of the
washer. Detach outer Drainage Hose and gently lay down the front side
of the washer on a soft mat or cushion.
• Be careful not to open the Washer Lid and dent the frame.
3. Detach the Cap from the left side of the frame.
4. Loosen the Hose Band and pull inner Drainage Hose out of the Drainage
Valve. Pull the Hose Band out of the Inner Drainage Hose.
5. Remove right and left Tabs of Drainage Outlet one side after another pushing the Tabs both inside and outside and
pull the Drainage Hose out toward outside of frame.
6. Pull out this inner Drainage Hose from the left hole and attach it to the Drainage Outlet securely.
7. Connect the inner Drainage Hose to the Drainage Valve in place and fix the Hose Band.
• If you do not attach as instructed, it can damage the inner Drainage Hose and cause a water leakage through the
torn position.
8. Attach the Cap to the right hole.
9. Re-attach Back Cover and gently set the washer up.
EXTENSION OF THE DRAINAGE HOSE
When extending the external Drainage Hose, please follow the below figure for the length and height.
EXTENSION
HEIGHT
LENGTH
Not straight
Max. 15cm
Max. 1m
Straight
Max 3m
B
C
A
D
E
F
G
H
LED DISPLAY INDICATOR
Display various setting information as follows:
• By default, the display will show remaining washing time (e.g.) Remaining time is 20 minutes
• When FUNCTIONbutton is pressed, the digital display indicates time or times. (E.g.) Twice Water Saver Rinsed
• When WATER LEVEL is Pressed, the indicator shows water level. (E.g.) Water level is 24L
• When malfunction occur, the indicator will indicate warning. (E.g.) Water does not flow
DETERGENT INDICATION
• These are the spoon indications of the DETERGENT volume.
• Refer to “DETERGENT AND LOAD RECOMMENDATIONS” on page 10.
START/PAUSE BUTTON
• Press this button to start the washer operation.
• This button can also be used to pause the washer operation. To restart the washer operation, press the STAR/PAUSE
button again.
NOTE:
1. This is not a cancel button.
2. To cancel the End Buzzer, press and hold the START/PAUSE button for about 4 seconds until beeping ceases.
WATER LEVEL BUTTON
• You can choose the appropriate water level that matches the load size.
FUNCTION AND SET BUTTON
• The FUNCTION and SET button can beysed to select PRESET, SOAK, WASH time, RINSE time, and SPIN time. For
example, to set RINSE time: Press the FUNCTION button till RINSE light flashes. Then, press the SET button to select
the desired rinse times.
PROGRAM BUTTON
• To choose the PROGRAM, press the PROGRAM button. Press until light flashes at required program.
• You can set the CHILD LOCK function. Refer to the CHILD LOCK section at page 14.
A
B
C
D
E
F
MWM-680FA(IM)130312_Layout 1 3/13/12 3:22 PM Page 5
