Wall
MODEL
MVF-WA80
MVF-WA100
MVF-WA120
RAtED VOLtAgE / FREquEnCy
220-240V~ 50Hz
RAtED WAttAgE
30 W
35 W
40 W
AiR DELiVERy
(m
3
/min)
8.1
12
18
nOisE
(dB<A>)
42
45
52
2
3
MODEL
A
B
C
D
E
MVF-WA80
200
300
240
89
31
MVF-WA100
250
345
288
88
36
MVF-WA120
300
400
340
104
36
1. Body
2. Louver
3. Blade
4. Spinner
MEASUREMENT
(mm)
CONNECTION PLAN
INSTALLATION METHOD
INSTALLATION INSTRUCTIONS
CARE & MAINTENANCE
PARTS IDENTIFICATION
SPECIFICATION
INSTALLATION INSTRUCTIONS
FOR YOUR SAFETY
To reduce the risk of injury, electric shocks, fire, malfunction, and damage to
equipment - always observe the following safety precautions.
1. Ensure cable connection is correctly secured and safe.
2. This equipment must be installed by a qualified technician.
3. Be sure to select the appropriate voltage before attempting to connect with power
supply. Use only with rated volatge.
4. Manually move fan blades to ensure it is free from obstruction that may prevent proper
fan operation before connecting to the power supply.
5. Ensure a ground clearance of more than 2.5m during installation.
6. Ensure yellow and green double coloured cables are properly grounded.
7. This equipment must be installed in accordance to installation instructions. Any
changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.
8. To avoid air backflow vented out from the equipment, ensure that windows and doors
facing the same direction as the vented air are shut.
9. Keep all packaging materials away from children’s reach.
10. Contact gap must be at least 3mm away from the pole disconnection.
11. This equipment is not intended for use by young children or infirm persons without
supervision.
12. Children should be supervised to ensure they do not play with the equipment .
13. The power cord cannot be replaced. Do not use the equipment if the power cord is
damaged.
1. Regular cleaning of the fan is recommended for optimal operation.
2. Safety Warning: Ensure the fan is switched off and before carrying out cleaning and
maintenance work.
3. Use a damp cloth (using water only) to wipe down the fan and surrounding housing.
4. Important Note: Do not use cleaning agents or solvents when cleaning this fan.
5. Do not allow water to come into contact with electrical parts such as motors & switches.
6. Do not immerse fan blades or other resinous parts in hot water over 60°C.
