7
SAFETY FUNCTIONS AND FEATURES
6
USING YOUR INDUCTION COOKTOP
• Pollution free: no burning, smoke or harmful gases like carbon monoxide, nitrogen dioxide and
formaldehyde
• Safe: no flame, no exhaust
• Easy-to-clean: high-rigidity glass faceplate
• Automatic shutoff: cooktop turns off 30 seconds after pan is removed
• Protection against overheating
CLEANING AND MAINTENANCE
• Because it does not generate its own heat, the induction cooktop has no grates or carbon build-up
to clean.
• No scorching heat going up the sides of your cookware means cookware stays cleaner longer.
• Use a damp cloth with mild soap to clean the control panel
• Use a nonabrasive cleaning product to clean the cooktop (available in most grocery stores).
Note: Any other servicing should be performed by an authorized service representative.
TROUBLESHOOTING
Error Code Possible Reasons Solution
E0 Incompatible cookware used Use a compatible cookware
E1 IGBT sensor open circuit/short circuit Contact authorized service centre
E2 IGBT overheated Contact authorized service centre
E3 Over-voltage 270V Inspect power supply
Wait for power supply to resume
E4 Under-voltage 90V Inspect power supply
Wait for power supply to resume
E5 Top plate sensor open/short circuit Wait a few minutes for appliance to cool down &
check pot/pan.
E6 Top plate overheated Contact authorized service centre
The above are the recommended solution for common failures.
IMPORTANT: Do not attempt to disassemble/repair the appliance yourself to avoid any personal
injuries and/or damage to the appliance. Consult your authorized service centre.
OPERATION
• Once the unit is plugged into a power supply, place your induction-ready cookware on the cooktop
and press ON/OFF to power on the appliance.
• Cookware detection: Unit will beep and automatically turn off after 30 seconds if cookware is not
compatible.
• NOTE: If the unit is turned on and no cookware is detected on the cooktop, the unit will beep and
turn off after 30 seconds.
• If you remove the cookware from the cooktop during operation mode, the unit will beep and will
automatically turn off after 30 seconds.
HEAT SETTINGS ( ) ( )
• These two buttons are for adjusting heat levels range from 60°C to 240°C.
• The corresponding power level is from 200W to 2000W with 10 heating levels. These buttons are
also used for setting the pre-set and timer functions.
• After appliance has powered on, select the desired function for cooking using the function selector
switch.
• Pressing any button will illuminate the corresponding LED beside it.
• The WATER/MILK/RICE/SOUP functions display the default times, and they are 2000(W),
80 (°C), 1000(W) and 1600(W) respectively.
• By default, these values are the time duration of 4 functions. Upon reaching the pre-set time, the
appliance will automatically shut off.
• Press the UP & DOWN buttons to adjust.
• Finally, choose either of the 4 functions to finish setting when timer elapses, the designate function
will activate automatically.
• Pressing any button will illuminate the corresponding LED beside it.
• The initial display on the screen is different.
• For Hot Pot, BBQ, Fry and Stir Fry FUNCTIONS- it display 1400(W), 240 (°C) ,200 (°C), 2000(W)
respectively.
• Press the UP & DOWN buttons to adjust the power/temperature.
NOTE:
The cooking surface will be hot after use, and care should be taken when adding on
or removing cooking utensils from the cooktop to avoid burns.
