Install the appliance according to instructions and
place at the desired location.
Leave the doors open for
proper ventilation.
•
After installing the appliance, wait for at least 6 hours before powering on the appliance.
(During transportation the oil in the compressor may have flowed into the refrigeration
system.)
•
During initial start-up, the cabinet may be hot and the compressor will work continuously
before the thermostat stops at the preset temperature and function optimally.
•
It is recommended to store food items into the cabinet once the interior temperature
reaches
the preset temperature.
Clean the inner cabinet before first use.
9
8
BEFORE FIRST USE
CARRYING & INSTALLATION
GENERAL OPERATING INFORMATION
The cabinet temperature is controlled by the thermostat on the panel. The
thermostat can set a suitable temperature range according to different ambient
temperatures and different loads.
•
The red indicator is the POWER indicator. During POWER on, the red indicator will
illuminate.
•
The green indicator is the OPERATION indicator. When the compressor runs, the green
indicator will illuminate.
•
The thermostat knob can be rotated from MIN to MAX.
•
When rotating clockwise, cooling time will be longer & stopping time will be shorter. In this
way, the cabinet temperature will be lower.
•
When rotating anti-clockwise, cooling time will be shorter & stopping time will be longer. In
this way, the cabinet temperature will be higher.
•
After adjusting the thermostat, it will take some time to reach the optimal performance
temperature.
2
5
6
7
3
1
4
FFrreeeezzee
Keep some spaces between stored food items to
maximise cool air circulation and heat exchange to
achieve better cooling effect.
Keep food items fresh by storing in kept bags or
closed containers to avoid food smell contamination or
from drying out.
Allow hot food to cool down to room temperature
before storing into the appliance to avoid decreasing
the cooling level of other stored food items.
Open the door as briefly as possible & close the door
at all times to minimize power consumption.
It is recommended to indicate the freeze-in date on
every individual pack stored in the appliance. Follow a
FIFO (First In, First Out) process to take earlier stored
food items first.
Set different cooling temperatures according to
different food items. Extremely cool temperatures will
result in excess power consumption.
In the event of a power outage or switching off the
appliance, always wait at least 5 minutes before
restarting. Failure to do so may shorten the
compressor life or
even damage the
compressor.
If a power cut has been notified in advance, set the
thermostat for a low temperature and keep the
appliance cooling for some time. Open the door as
briefly as possible and
do not add more food
items
into
the
appliance.
