5
4
IMPORTANT SAFEGUARDS
PARTS IDENTIFICATION
•
Do not operate this appliance if it has malfunctioned, damaged hose or connector or
appears damaged in any way. Contact the manufacturer or its authorized agent for
inspection, repair or replacement.
•
Do not use or store flammable materials in the vicinity of this appliance while it is in
operation.
•
Do not spray aerosols in the vicinity of this appliance while it is in operation.
•
Do not modify this appliance.
•
Always turn off the gas supply when not in use, before assembling or disassembling parts
and before cleaning. Fully assemble the product before operating.
•
Ensure all the burners are well positioned before operating the product. Do not operate
the hob if the burners are not positioned properly.
•
Always disconnect the appliance from the gas source when moving it.
•
In case of gas leakage, turn off the main cock and ventilate the room immediately by
opening the windows and doors. Do not attempt to turn the wall switch of fans or other
electrical appliances on or off.
CAUTION: Should the hotplate glass break, shut off all burners and electrical
heating elements immediately. Isolate the appliance from the power supply and do
not use or touch the appliance.
•
WARNING:
Danger of fire: Do not store items on the cooking surfaces.
•
WARNING:
Unattended cooking on a hob with fat or oil can be dangerous and may result
in fire.
ENVIRONMENTAL IMPACT FOR THE USER
Protect the environment, benefit mankind, minimize pollution, continuous improvement is
our Company’s direction towards environmental management.
In accordance with G/T24001 & IS014001 standards, our Company seeks to establish,
implement and maintain environmental management system good practices, with the impact
of using and completing our products’ shelf life as follows:
•
Please recycle paper materials by leaving them at the paper recycling station. Ensure to
dispose of foam polystyrene and plastic film at the special waste recycling station.
•
Indoor ventilation should be maintained at all times during the disposal of this appliance
as CO, CO², N²O, and other exhaust gases will be discharged and pose a health risk,
personal injury and even death such as hypoxia poisoning.
•
Please refer to the national provisions of the shelf life as scrap and Midway replacement
scrap should be sent to the local waste acquisition station unified treatment (Note:
national standards GB17905-2008 (Regulations on the Safety Management of Household
Gas Burners).
•
CAUTION: Prolonged use of the appliance may require additional ventilation. This
includes leaving a window open or increasing the level of mechanical ventilation
where available for more effective ventilaton.
3
4
5
6
7
8 9
10
1
2
PARTNAME
1. Outer Cap
2. Inner Cap
3. Safety Valve
4. Anti-Spillage Tray
5. Knob
6. Glass Top
7. Pan Stand
8. Decorative Cover
9. Sparker
10. Bottom Base
SPECIFICATIONS
Product Built-in Gas Hob
Model No. MBH-SD2112
Gas Category I3B/P(30)
Gas Type Butane (G30), Propane (G31) or their mixtures
Gas Pressure 28 mbar
Total Heat Input ΣQn: 9.0kW (655g/h)
Consumption kW (g/h) Left: 4.5kW (327.5g/h) Right: 4.5kW (327.5g/h)
Heating Efficiency 63% Electrical Voltage DC 1.5V
Cut Size (mm) L650 x D350 (mm) Product Size L730 x D410 (mm)
Countries of Destination Malaysia (MY) Country of Origin Made in China
Manufacture to Import by
DKSH Malaysia Sdn. Bhd.
(4476-U)
B-11-01 The Ascent Paradigm, No.1 Jalan SS7/26A
Kelana Jaya, 47301 Petaling Jaya, Selangor, Malaysia.
This appliance must be installed in accordance with the regulations in force and only used in a well ventilated space. Read
the instructions before installing or using this appliance. Forbid to place on the surface of combustible objects.
