REV 08_2009.02
5
Before proceeding make sure that:
the mains voltage corresponds to the voltage on the refrigerator 240V/50Hz/1Ph;
to ensure proper operation it is essential for the power supply voltage to come
within a range of +/- 6% of the unit’s rated voltage
the electric system to which the refrigerator is sized to cater for the rated electric
output of the buffet unit being installed
the electronic system to which the refrigerator is connected is made in
compliance with current standard requirements
the electric connections and the installation of the thermomagnetic circuit breaker
have been done by qualified person.
Connecting steps:
1. Install a thermomagnetic circuit breaker suited to the rated output
of the unit being installed 2. Connect the refrigerator unit to the thermomagnetic circuit
breaker outlet 3. Check that the refrigerator is in order as demonstrated by the pilot light
incorporated in the main switch coming on
9. Maintenance instructions
The smooth operation and life of the equipment are mainly determined by correct and
regular maintenance
!! Disconnect the refrigerator power supply cable from the mains prior to carrying
out any type of cleaning operation.
10. Cleaning
Regular cleaning of the refrigerator unit is strongly recommended each month. Please
follow the instructions below.
!! Disconnect the refrigerator power supply cable from the mains prior to carrying
out any type of cleaning operation.
11. Cleaning the refrigerator surface
Clean the refrigerator with mild detergent and then dry it with a soft cloth.
Do not use abrasive detergents!
12. Cleaning the inside of the refrigerator
Clean the inside area min. each month with a detergent suitable for use with foodstuffs.
13. Cleaning the condenser
For an efficient operation of the refrigerator it is advisable to clean the condenser
regularly approx. every 4 months with a dry brush or vacuum cleaner.
