Morgan Olson 2016-2018 USPS 2 Ton Service Maintenance Manual Download Page 3

Page: 3 / 58

Genuine OEM Parts 1.800.233.4823 www.morganolsonparts.com

USPS 2 Ton Delivery Vehicle 2016 - 2018 Models

CONFIDENTIAL

NOT

FOR DISTRIBUTION

CONFIDENTIAL

NOT

FOR DISTRIBUTION

CONFIDENTIAL

NOT

FOR DISTRIBUTION

CONFIDENTIAL

NOT

FOR DISTRIBUTION

Body Tie/Downs

Tie/Down Check:

The floor of the truck is fastened to bolsters that extend the length of the floor.

The lower flanges of the bolsters are mounted to the chassis frame rails.

Both sets of fasteners are torqued to specifications.

All cab and body tie/downs should be checked after 3 months and annually.

Side Door

For smooth operation the locking mechanism should be oiled every 3 months or as needed.

Grease should also be added at the contact points of locking mechanism arm and striker.

(At opened and closed positions.)

Summary of Contents for 2016-2018 USPS 2 Ton



























































Search results

Summary of Contents for 2016-2018 USPS 2 Ton

Reviews:

Related manuals for 2016-2018 USPS 2 Ton

Brands by name

Popular brands

Morgan Olson 2016-2018 USPS 2 Ton, Service Maintenance Manual

Search results

Summary of Contents for 2016-2018 USPS 2 Ton

Reviews:

Related manuals for 2016-2018 USPS 2 Ton

Brands by name

Popular brands