Morgan Olson 2016-2018 USPS 2 Ton Service Maintenance Manual Download Page 17

Page: 17 / 58

Genuine OEM Parts 1.800.233.4823 www.morganolsonparts.com

USPS 2 Ton Delivery Vehicle 2016 - 2018 Models

CONFIDENTIAL

NOT

FOR DISTRIBUTION

CONFIDENTIAL

NOT

FOR DISTRIBUTION

CONFIDENTIAL

NOT

FOR DISTRIBUTION

CONFIDENTIAL

NOT

FOR DISTRIBUTION

Hood Removal:

1. For removal of the gas springs. See page 14.
2.

Disconnect wire harness plug connections.

Remove the 4 bolts tying the left and right hinge assemblies to the body of the truck.

4. Disconnect hood prop.
5. At this point the hood can be removed.

Hood Installation:

Before installation fasten hinge assemblies to hood assembly. Now using the original 4

fasteners install the completed assembly.

For installation of the gas springs, see page 14.

3. Reconnect all wiring.
4. Reconnect hood prop.

Hinge Replacement:

To replace hood hinge, remove three bolts attached to hood assembly.

Remove two bolts attached to windshield rail.

3. Slide hinge out to the side of the truck.
4. To replace hinge, install in reverse order.

Hood Stop Adjustment:

1. The stops that support the hood should be adjusted if the hood ever comes into contact

with the cab skirts. The stop bracket is slotted to allow for vertical adjustment. Adjust

brackets so that hood seats evenly and does not come into contact with cab skirts.

HOOD

Headlight Replacement:

1. Remove screws and trim from around headlight.
2. Remove headlight.
3. Remove wiring plug from back of headlight.
4. Replace headlight.
5.

For installation reverse removal sequence.

Tail, Turn Backup and Marker Lamp Replacement:

Push tail, turn back-up lamp into rubber grommet and use a small flat head screw driver

and pry lamp from rubber grommet.

2. Remove wiring plug from back of lamp.
3.

Install new lamp by reconnecting wiring plug to new lamp and pushing lamp into rubber

grommet until properly seated.

Clearance Marker and ICC Light Replacement:

1. From inside, unplug the lamp, push lamp out of the grommet. To replace, from the out-

side push the lamp into grommet. Some lubrication helps installation. Install so the mark

ing is towards the top. Hook up wiring taking care to match the polarity.

LAMPS

Summary of Contents for 2016-2018 USPS 2 Ton



























































Search results

Summary of Contents for 2016-2018 USPS 2 Ton

Reviews:

Related manuals for 2016-2018 USPS 2 Ton

Brands by name

Popular brands

Morgan Olson 2016-2018 USPS 2 Ton, Service Maintenance Manual

Search results

Summary of Contents for 2016-2018 USPS 2 Ton

Reviews:

Related manuals for 2016-2018 USPS 2 Ton

Brands by name

Popular brands