7
USING THE PRESSURE COOKER
6
ABOUT THE INNER POT
•
The use of the inner pot and its parts are for the intended purposes only. Do not use the inner pot for
cooking food on heating units or cooking surfaces.
•
Do not replace the inner pot with another container.
•
Ensure the heating element surface and bottom of the inner pot is clean and dry.
•
To avoid damaging the non-stick coating, do not use the inner pot for washing and mixing products.
Never chop products in the inner pot.
•
Never leave or keep any foreign objects in the inner pot.
•
When cooking, stir the products in the inner pot only with a plastic spatula.
•
Do not use metal objects which can scratch the non-stick coating of the inner pot.
•
Wash the inner pot immediately after cooking dishes with spices and seasonings.
•
To avoid damaging the inner pot coating, do not immerse it under cold water immediately after
cooking. Allow it to cool down before washing.
•
The inner pot is not dishwasher safe.
•
ATTENTION! During first use, the heating element may discharge an odor. This is normal.
•
Never leave the operating unit unattended.
•
To cancel a current operation mode, press and hold the Keep Warm/Cancel button.
•
NOTES:
– Although the appliance features a 24-hour Keep Warm function, it is not advisable to leave cooked
food in the inner pot overnight as it may spoil the food.
– Do not use the keep warm function for heating up foods.
•
Pressure modes in the inner pot
– If pressure control valve is locked, the appliance will cook using maximum pressure.
•
Loading foods and connecting to the power supply Notes:
– Ensure there are no foreign objects, dirt or moisture on the heating element and on the bottom of
the inner pot.
– Wipe the outer surface and the bottom of the inner pot dry before use.
– Do not allow obstructions on the temperature sensor located in the middle of the heating element.
– Ensure that the level of ingredients and liquids does not exceed the maximal mark and is not lower
than the minimal mark.
– Example: To cook rice, measure rice using the measuring cup, and fill water level following the
scale inside the bowl:
– Water level is given in cups «CUP». Pour water up to the corresponding mark.
– Example: After putting four measuring cups of cereal, pour water till the mark «4 CUP».
– For porridge it is recommended to use rice and water in the proportion of 1:3.
– Remove the lid by turning the lid in clockwise direction.
– Detach the inner pot and place food into the inner pot.
– Insert the inner pot into the heating element.
•
Before installing the inner pot, ensure that the outer surface is clean and dry, and is in secure contact
with the surface of the heating element.
•
Before installing the lid, check the valve and the blocking system elements. They should be clean and
the blocking system valve should be lowered.
•
Place the lid on the unit and turning in the anticlockwise direction to lock it.
•
Press ON/OFF button, “00:00” will show on the display screen. Then you can start cooking as
following instruction in different situation.
•
Unpack the unit, remove any stickers and packaging materials.
•
Place the appliance on a flat, heat-resistant surface away from all kitchen heat sources (such as gas
cooker, electric cooker or cooking unit).
•
Allow at least 20cm gap between the appliance body and wall, and 30-40cm gap above the unit.
•
Do not place the appliance close to objects that can be damaged escaping hot steam.
Attention! Do not place the unit near bathtubs, kitchen sinks or other containers filled with water.
•
Turn the lid in the direction of the symbol and detach it.
•
Wash all removable parts with a soft sponge and a neutral detergent and rinse them under running
water and dry before reassembly.
•
Remove the silicon lid gasket, wash with warm water and neutral detergent, then rinse, allow to dry
and reassemble.
•
Clean the unit body with a damp cloth, then wipe it dry.
•
ATTENTION: Do not leave the lid of the unit opened during operation.
BEFORE FIRST USE
