Moretti ARDEA ONE CP100 Series, Instruction Manual

Page: 40 / 48

8
ENGLISH
8.8 Adjust the brakes with 30cm wheels (only for GO!)
(FIG.9)
• When the 30 cm wheels are installed,
place the brake as (FIG.9)
Note adjust the brake device
so that it can make the right
pressure to securely lock the wheel
Images for illustrative purposes only
8.9 Install/remove the 60cm wheels (only for START, START2)
Place the wheel into the central hole on the wheelchair frame
(FIG.10)
Only for quick release wheels (only for START2)
• Remove the plastic cap and
push the wheel until it locks
into the place (FIG.10)
• Remove the wheels: push the button
on the centre of the wheel,
and extract the wheel (FIG.10)
Only for wheels with fixed axle (only for START)
•
Place the big wheel and block it with the nut
• Unscrew the nut and remove the big wheel
8.10 Adjust the brakes with 60cm wheels (only for START, START2)
(FIG.11)
• When the 60 cm wheels are installed,
place the brake on the milling. Lock the
device by tightening the Allen wrenches
(FIG.11)
Note adjust the brake device so that it can
make the right pressure to securely lock the
caster