2.2.2 Adjust the camera angle position
1. MDR-150 camera angle can be
tilted up / down, as well as swivel.
Tighten the bracket mount to
secure angle
2.3 Connecting Power
Use only the supplied car adapter to power up
the camera and charge the built-in battery.
1. Connect one end of the car power to the USB connector of
the MDR-150.
Ensure the GPS receiver is mounted to windshield with
adhesive side facing the sky for better signal reception
Power output of MDR power cable : DC 5V / 1500mA
2. Plug the other end of the car charger to the cigarette lighter
socket of the vehicle. Once the vehicle engine is started, the
camera automatically turns on. Car charger input:
Important Note:
1.Use the MDR with the supplied charger only. Do NOT use
other power chargers to avoid damage to camera or battery.
2. Do NOT modify the power cable or connection method as
outlined in this manual. Altering the power cable will void all
warranty.
06
07
Note:
On certain vehicles, the cigarette lighters are
constantly ON (Hot) so the MDR recording will continue
even when the vehicle is powered off. If this happens,
please manually turn off the camera or remove the car
adapter from the cigarette lighter to prevent battery drain
GPS Receiver / Power Cable
GPS Receiver
