
www.mopeka.com
Page
4
of
14
M200004E
For LPG Tank
✓
Display Users:
6.
Pull the battery protection strip completely out of display and discard. This will turn on the display.
7.
Hold one of the buttons on your Display until the lights for that button start flashing (approx 5
seconds). Release button when lights start flashing.
8.
Press and hold SYNC button until sensor (up to 10 seconds) until the display lights stop flashing. The
sensor is now synced with the display.
9.
Repeat steps to sync the second sensor to the 2nd button/gauge of the display.
10.
Both sensors are now sync’d to the display.
11.
The display is programmable, allowing you to choose a tank size of 20 lb (5 gal), 30 lb (7.5 gal), or 40 lb
(10 gal).
12.
It is automatically set to 20 lb from the factory. To change the size setting, hold the button of the
scale you want to change for 10 seconds. (After 5 seconds lights will start flashing, as when syncing.
But continue to hold button until lights change again.)
13.
At 10 seconds, a single light will appear. Continue to hold button. The single light will scroll between
red, yellow, and green. When the color corresponding to your tank size appears, release the button.
Your tank size is now set.
•
Red = 20 lb
•
Yellow = 30 lb
•
Green = 40 lb
14.
You are now ready to install the sensor(s) on the tank(s).