ISOLATE FROM ELECTRICAL SUPPLY BEFORE REMOVING COVER
5IFUXPQPXFSTVQQMZGVTFTBSFMPDBUFEPOUIFVOEFSTJEFPGUIFCPBSEJO
UIFQPTJUJPOTIPXO
The third fuse is an anti surge fuse. Fuse type and ratings are marked adjacent
to the fuse holders or alternatively see page 14.
Undo the four captive retaining screws to remove the cover.
Prior to replacement ensure that the rubber seal
set into the underside cover has not
been disturbed.
FUSE REPLACEMENT
Retighten cover fully ensuring that
the cover is seated properly.
Medezine Limited
Churchill Way Chapeltown
Sheffield England
S35 2PY
T
F +44 (0)114 257 6222
E [email protected]
W www.medezinesaws.com
+44 (0)114 257 6002
2002/289
Status Indicator
Filtration Unit Output
energized when lit.
Captive Retaining Screws
Enclosure Cover
Status Indicator
Saw Unit Output
energized when lit.
4UBUVT*OEJDBUPS
1PXFS4VQQMZ
FOFSHJ[FEXIFOMJU
Status Indicator
Saw Unit overload detected
when flashing. Complete
system will shut down. Then
Auto-reset to “System off”
status in approx. 20 seconds.
Waterproof Electrical
Connectors
Screw Locking-Non
Interchangeable
Waterproof Electrical
Connector
Screw Locking-Non
Interchangeable
.01&$"VUPQTZ4BX1PXFS4VQQMZ