12
21. Remove the WCM mounting screw on the ignition lock
assembly and separate the WCM (1 and 3) from the
ignition lock assembly (5).
22. Disconnect the WCM electrical connector (4).
23. Remove the WCM (1 and 3) from the column (2) and
discard.
24. Obtain the supplied WCM (1 and 3) from the kit and
connect the remote start antenna to the WCM (1 and
3).
25. Position the WCM (1 and 3) on the ignition lock hous
ing (5) and install the retaining screw on the top of the
ignition lock housing (5).
26. Connect the WCM electrical connector (4).
27. Connect the right stalk electrical connector (1) to the
SCCM (2).
Feb 18
, 201
6
K6861211
