2
Vehicle being upgraded from (AM/FM and SATELLITE Audio (SDARS)) you will need to do the following:
• RADIO REPLACEMENT
• ANTENNA REPLACEMENT
RADIO REPLACEMENT
1.
Disconnect and isolate the battery negative cable.
2.
Using a trim stick C4755 or equivalent, work around
the perimeter of the bezel, and across the middle re
leasing the retaining clips (1) and separate the bezel
from the instrument panel.
3.
Disconnect the electrical connectors (1) and remove
the bezel.
4.
Remove the radio mounting fasteners.
CAUTION: Pulling the antenna cable straight out of the radio without pulling on the locking antenna connector
could damage the cable or radio.
Dec 30, 2010
KK6861240 Rev.1
