VP2DJF-19A016-EB 4/30/04
Page 4 of 7
Align To
Trim
1)
Using the template provided, prepare and align it
to the left rear trim as indicated.
2)
Using a center punch or scribe, pierce the
template and mark the trim panel for hole
locations. Draw a line between the top and
bottom holes for future cutting.
D - Auxiliary Harness and Module Installation:
Stay clear of airbag tether in the A-pillar and side
curtain airbag in the headliner
.
7)
Route lower portion of the overhead wiring
harness down the left A-pillar as shown.
8)
Feed lower portion of wiring harness down
inside instrument panel (I/P) keeping between
left A-pillar and I/P top cover.
Keep harness away from any sharp edges, heat sources
or moving parts.
9)
Route harness across the inside of knee bolster
bracket and into DVD opening.
10)
Secure wiring harness to I/P and A-pillar using
tie straps.
11)
Plug connector into the DVD player (Item 12).
CAUTION:
NOTE:
Metal Knee
Bolster Bracket
Overhead
Harness
Overhead
Harness
Overhead
Harness
