5
BATTERY
Your scooter is equipped with two sealed, maintenance free 17 AH
batteries.
- Charge the batteries prior to using your scooter for the first time.
- Keep the batteries fully charged to keep your scooter running
smoothly.
READING YOUR BATTERY VOLUME
The battery volume meter on the tiller console uses a color code to
indicate the condition of your batteries. Green indicates fully charged
batteries, yellow a draining charge, and red indicates that an immediate
recharging is necessary.
CHARGING YOUR BATTERIES
The following steps will guide in charging the battery safely:
- Position your scooters close to a standard wall outlet .
- Remove the key from the key switch.
- Plug the 3-pin charger cord into the battery receptacle.
- Plug the charger input into the wall outlet to charge. It is recommend-
ed that you charge your batteries for 8 to 14 hours.
- When fully charged, unplug the charger input cord form the wall
outlet first and then unplug the charger output cord from the battery
receptacle.
CHARGING STATUS
There is a LED on the charger, when lit:
*If the LED toggles between red and green:
The battery has dropped too low and needs normal charging, causing the
charger to automatically pulse charge the batteries to an acceptable level.
Once that level is reached it will charge normally.
BATTERY REPLACEMENT
1. Removes battery pack from the scooter by releasing the battery pack
lock, grasping the handle, and lifting up.
2.Remove all screws that hold the battery pack.
3. Remove the connectors and replace the used battery with the new one.
Power (green)
Charger (red)
Charging is in progress
Power(green)
Charger (green)
Charger is plugged in; batteries
fully charged
Power(red)
Charger (off)
Error: short circuit, lead reversed,
battery disconnected
