Manual Part No: 931545-02 MV1 Gas Solid Top Range
- 11 –
Manual Rev No: 1
Installation (cont.)
Important Note
The appliance
MUST NOT
be connected
DIRECTLY
to a flue or ventilating system, although the flue
products of two or more appliances may be directed into a common outlet when building a suite of
appliances (see separate instructions for suiting appliances).
Ensure that the appliance is level in two places - front to rear and side to side. To check the level it is
recommended that a spirit level be placed on a shelf in the open oven -
NOT
on top of the hotplate!
Level can be achieved by adjusting any or all of the screw in feet in each corner of the base. Turn anti-
clockwise to lower and clockwise to raise the corner.
Gas Connection
Natural Gas: The size of the supply pipe should be no smaller than ½” BSP and an easily accessible
stopcock must be fitted in the gas line adjacent to the appliance. The gas governor provided with the
appliance
MUST
be fitted in the supply line BETWEEN the stopcock and the appliance.
Armoured flexible pipe of a
GAS COUNCIL APPROVED
PATTERN
must be used to facilitate servicing.
Ensure that all the pipes to the appliance are clean and free from swarf etc,
BEFORE
making the final
connection.
Propane Gas: Follow the same procedure as that for Natural Gas
EXCEPT
that the Gas Governor
MUST
NOT
be fitted - the Gas Supply Tank or Cylinders are already fitted with a Gas Regulator.
