3
1.)
R
EAD
T
HROUGH
I
NSTRUCTIONS
FROM
BEGINNING
TO
END
BEFORE
STARTING
TO
ASSEMBLE
UNIT
.
Identify and Separate all the Parts and Hardware.
Lumina Carrel Add-On Assembly Instructions
2.) Screw in 2 Glides (G) into the bottom of Leg (P-4) as shown in Illustration #1.
3.) Attach Leg Brace (P-5) to the outside of Leg of Starter Carrel and Leg (P-4 of Add-On)
using two Screws (A-1) as shown in Illustration # 1. Tighten Screws (A-1) using Allen Wrench (C).
Attach Top Brace (P-6) to the Top Support Tube on th Starter Carrel using three Screws (H)
as shown in Illustration #1.
4.) Screw in two Camposts (B) into the outside threaded holes on the Starter Carrel’s Right Side Panel
as shown in Illustration #2.
.
Illustration # 1
P-4
G
Starter Carrel
P-5
A-1
P-6
H
Illustration # 2
B
